Installing garage floor paint at workplace or home comes with numerous benefits. To enjoy these benefits, you need to give special emphasis during the installation process.
Here we discuss some essential mistakes that you should avoid during the installation of garage floor paint.
Poor floor preparation
More often than not, people don’t take floor preparation seriously. They believe that normal cleaning is sufficient before installing the floor coating. But, in reality, the surface has to be free of waxes, oils, and contaminants to ensure epoxy adheres properly.
Moisture in the concrete
Another common error is not allowing the concrete to dry properly after processes like acid etching. Based on humidity and temperature conditions, you are required to give 24 hours for a floor to dry, or even more in some cases.
Stretching the coating
The users, sometimes, stretch the coating to cover the area. This is not a correct way to install, as it leads to weaker coating and lack of glossy finish. You may also notice a difference in color if you try to stretch the coating.
By mixing the epoxy too fast using a paddle mixer, you may face some issues. If you don’t mix the epoxy properly, the chances are epoxy may not harden or cure properly.
Not following manufacturer’s instructions
Every manufacturer of epoxy offers some instructions related to humidity and temperature. You may face the issues like moisture on the concrete surface or improper hardening if you don’t install the epoxy floor paint as per the instructions.
Conclusion: Make sure to avoid these mistakes to enjoy all the benefits of epoxy floor coating. To purchase the garage floor coating from Epoxytech, check this link.